Used to prevent galling and seizure of metals. Lubricant covered by this specification is intended for use on aluminum, copper, steel and stainless steel, titanium, chromium and nickel bearing surfaces. Useful where conventional lubricants are difficult to apply or retain or where other lubricants may be easily contaminated. Cured lubricant film is highly resistant to conventional fluid lubricants.

Do not use on materials adversely affected by exposure to temperatures of 300 F for 1 hour - on bearings containing rolling elements - or where there is potential contact with liquid oxygen.
Pretreatment of metals such as anodizing, etc, required prior to the solid film process.